T: +8615609213525
E: 15829336298@139.com
E: 15829336298@139.com
Room 1212-G107, Unit 2, Building 1, Block A, Shenglong Plaza, No. 80 Weiyang Road, Weiyang District, Xi'an City, Shaanxi Province
| Quantity: | |
|---|---|
WG1664240006
Shacman
| Attribute | Description |
|---|---|
| Part Name | Lower Bumper Panel / Front Air Dam / Lower Grille Panel |
| OEM Number | WG1664240006 |
| Position | Front lower section of the cab — installed under the main bumper or radiator grille |
| Material | High-impact ABS or PP plastic (UV-stabilized and impact-resistant) |
| Color (As Shipped) | White or gray primer finish — ready for painting to match body color |
| Dimensions | Standard OEM size — designed to fit original contours and mounting points |
| Weight | Lightweight — significantly lighter than steel alternatives (exact weight varies by supplier) |
| Design Type | Aerodynamic profile with integrated ducts (on some versions) for airflow management |
| Condition | Brand new (OEM or premium aftermarket) |
| Function | Protects lower front structure; improves airflow; enhances visual symmetry |
Name1
Name2
Verify Compatibility Before Purchase
Confirm your truck model, production year, and front bumper configuration.
Some HOWO A7 variants use slightly different lower panel designs.
Professional Installation Recommended
Requires removal of underbody shields and possibly fog lights.
Align carefully with upper grille and side fender gaps.
Paint Before Installation
The panel ships in primer coat only — must be painted to match vehicle body.
Sand, prime, and apply base + clear coat using automotive-grade paint.
Mask off mounting areas to avoid overspray on connectors.
Use Proper Fasteners
Reuse original clips and screws if undamaged.
Replace broken plastic rivets with OEM-spec equivalents.
Avoid Over-Tightening Screws
Can crack plastic around mounting holes — tighten just until snug.
Check Ground Clearance After Install
Ensure the panel does not drag on inclines or uneven terrain.
Inspect Regularly for Damage
Look for cracks, warping, or loose sections caused by vibration or impacts.
Repair small cracks early to prevent spreading.
Transportation & Packaging
Large and fragile — always shipped in reinforced cardboard or wooden crate.
Handle with care — avoid dropping or bending edges.
Do Not Use Harsh Cleaners
Avoid abrasive polishes, degreasers, or pressure washers near seams.
Clean with mild soap and water to preserve surface finish.
Storage Advice
Store flat in dry, indoor conditions.
Keep away from direct sunlight to prevent UV degradation before installation.
| Attribute | Description |
|---|---|
| Part Name | Lower Bumper Panel / Front Air Dam / Lower Grille Panel |
| OEM Number | WG1664240006 |
| Position | Front lower section of the cab — installed under the main bumper or radiator grille |
| Material | High-impact ABS or PP plastic (UV-stabilized and impact-resistant) |
| Color (As Shipped) | White or gray primer finish — ready for painting to match body color |
| Dimensions | Standard OEM size — designed to fit original contours and mounting points |
| Weight | Lightweight — significantly lighter than steel alternatives (exact weight varies by supplier) |
| Design Type | Aerodynamic profile with integrated ducts (on some versions) for airflow management |
| Condition | Brand new (OEM or premium aftermarket) |
| Function | Protects lower front structure; improves airflow; enhances visual symmetry |
Name1
Name2
Verify Compatibility Before Purchase
Confirm your truck model, production year, and front bumper configuration.
Some HOWO A7 variants use slightly different lower panel designs.
Professional Installation Recommended
Requires removal of underbody shields and possibly fog lights.
Align carefully with upper grille and side fender gaps.
Paint Before Installation
The panel ships in primer coat only — must be painted to match vehicle body.
Sand, prime, and apply base + clear coat using automotive-grade paint.
Mask off mounting areas to avoid overspray on connectors.
Use Proper Fasteners
Reuse original clips and screws if undamaged.
Replace broken plastic rivets with OEM-spec equivalents.
Avoid Over-Tightening Screws
Can crack plastic around mounting holes — tighten just until snug.
Check Ground Clearance After Install
Ensure the panel does not drag on inclines or uneven terrain.
Inspect Regularly for Damage
Look for cracks, warping, or loose sections caused by vibration or impacts.
Repair small cracks early to prevent spreading.
Transportation & Packaging
Large and fragile — always shipped in reinforced cardboard or wooden crate.
Handle with care — avoid dropping or bending edges.
Do Not Use Harsh Cleaners
Avoid abrasive polishes, degreasers, or pressure washers near seams.
Clean with mild soap and water to preserve surface finish.
Storage Advice
Store flat in dry, indoor conditions.
Keep away from direct sunlight to prevent UV degradation before installation.
