T: +8615609213525
E: 15829336298@139.com
E: 15829336298@139.com
Room 1212-G107, Unit 2, Building 1, Block A, Shenglong Plaza, No. 80 Weiyang Road, Weiyang District, Xi'an City, Shaanxi Province
| Quantity: | |
|---|---|
A22-68134-000/A22-68144-000
Shacman
| Attribute | Description |
|---|---|
| Part Name | Front Right Side Fairing Panel / Lower Step Cover / Aerodynamic Skirt |
| OEM Number | A22-68144-000 (also written as A2268144000) |
| Position | Front passenger side (right-hand side) — below the cab door, near the entry step |
| Material | High-impact durable plastic or composite polymer (UV-stabilized and flexible) |
| Color (As Shipped) | Gray primer or black base — requires painting to match vehicle color |
| Design Type | Molded aerodynamic shape with integrated channels for airflow optimization |
| Dimensions | Standard OEM size — designed to fit P3-generation Cascadia cabs |
| Weight | Approx. 3.0 – 4.5 kg |
| Condition | Brand new (OEM original or premium aftermarket) |
| Function | Aerodynamic smoothing, splash protection, and underbody shielding |
Name1
Name2
Verify Compatibility Before Purchase
Confirm your truck is a 2007–2017 Cascadia 125 (P3 generation).
Panels from later models (e.g., Cascadia Evolution) are not interchangeable.
Paint Before Installation
The panel comes in gray primer or unpainted black plastic — must be painted to match the vehicle.
Sand lightly, apply adhesion promoter, then base coat + clear coat using automotive-grade paint.
Professional Installation Recommended
Requires removal of nearby trim, steps, or fender liners.
Use proper tools to avoid breaking clips or scratching surrounding panels.
Inspect Mounting Hardware
Check all plastic rivets, screws, and push pins — replace any damaged fasteners.
Ensure full attachment to prevent flapping at speed.
Ensure Full Sealing
Align edges flush with bumper and door sill to prevent water intrusion and wind noise.
Apply rubber sealant if needed (non-conductive type).
Avoid Over-Tightening Screws
Can crack plastic around mounting holes — tighten just until snug.
Check Ground Clearance
After installation, ensure the panel does not drag on inclines or uneven terrain.
Regular Inspection Schedule
Cracks or splits
Loose or missing fasteners
Sagging or misalignment
Inspect every 50,000 km or quarterly for:
Repair early to avoid further damage.
Transportation & Packaging
Large curved panel — always shipped in reinforced cardboard or wooden crate.
Handle carefully — avoid dropping or bending edges.
Do Not Operate with Damaged Panel
A loose or broken fairing can detach while driving — risk of accident or secondary damage.
| Attribute | Description |
|---|---|
| Part Name | Front Right Side Fairing Panel / Lower Step Cover / Aerodynamic Skirt |
| OEM Number | A22-68144-000 (also written as A2268144000) |
| Position | Front passenger side (right-hand side) — below the cab door, near the entry step |
| Material | High-impact durable plastic or composite polymer (UV-stabilized and flexible) |
| Color (As Shipped) | Gray primer or black base — requires painting to match vehicle color |
| Design Type | Molded aerodynamic shape with integrated channels for airflow optimization |
| Dimensions | Standard OEM size — designed to fit P3-generation Cascadia cabs |
| Weight | Approx. 3.0 – 4.5 kg |
| Condition | Brand new (OEM original or premium aftermarket) |
| Function | Aerodynamic smoothing, splash protection, and underbody shielding |
Name1
Name2
Verify Compatibility Before Purchase
Confirm your truck is a 2007–2017 Cascadia 125 (P3 generation).
Panels from later models (e.g., Cascadia Evolution) are not interchangeable.
Paint Before Installation
The panel comes in gray primer or unpainted black plastic — must be painted to match the vehicle.
Sand lightly, apply adhesion promoter, then base coat + clear coat using automotive-grade paint.
Professional Installation Recommended
Requires removal of nearby trim, steps, or fender liners.
Use proper tools to avoid breaking clips or scratching surrounding panels.
Inspect Mounting Hardware
Check all plastic rivets, screws, and push pins — replace any damaged fasteners.
Ensure full attachment to prevent flapping at speed.
Ensure Full Sealing
Align edges flush with bumper and door sill to prevent water intrusion and wind noise.
Apply rubber sealant if needed (non-conductive type).
Avoid Over-Tightening Screws
Can crack plastic around mounting holes — tighten just until snug.
Check Ground Clearance
After installation, ensure the panel does not drag on inclines or uneven terrain.
Regular Inspection Schedule
Cracks or splits
Loose or missing fasteners
Sagging or misalignment
Inspect every 50,000 km or quarterly for:
Repair early to avoid further damage.
Transportation & Packaging
Large curved panel — always shipped in reinforced cardboard or wooden crate.
Handle carefully — avoid dropping or bending edges.
Do Not Operate with Damaged Panel
A loose or broken fairing can detach while driving — risk of accident or secondary damage.
