T: +8615609213525
E: 15829336298@139.com
E: 15829336298@139.com
Room 1212-G107, Unit 2, Building 1, Block A, Shenglong Plaza, No. 80 Weiyang Road, Weiyang District, Xi'an City, Shaanxi Province
| Quantity: | |
|---|---|
DZ14251153001
Shacman
| Attribute | Description |
|---|---|
| Part Name | Cab Front Panel Assembly / Front Body Panel / Front围板 |
| OEM Number | DZ14251153001 |
| Position | Front section of the truck cab — between the hood and A-pillar, forming the upper front face of the chassis |
| Material | High-strength cold-rolled steel sheet metal, precision stamped and welded |
| Design Type | Integrated structural panel with mounting points for hood hinges, lights, and grille |
| Surface Finish | Epoxy primer or zinc-coated undercoat — ready for painting (not painted) |
| Color (As Shipped) | Gray/black primer only — requires final paint after installation |
| Dimensions | Standard OEM size — full-width front panel; approx. 2.2m × 0.8m (varies by model) |
| Weight | Approx. 25–40 kg (depending on thickness and reinforcements) |
| Condition | Brand new (OEM fresh stock or high-quality aftermarket) |
| Function | |
| • Provides structural rigidity to the cab | |
| • Serves as foundation for front-end components | |
| • Contributes to crash energy absorption |
Name1
Name2
Verify Compatibility Before Purchase
Confirm vehicle model, year, and cab generation.
Some X3000 variants have slight differences in hole placement or curvature.
Professional Installation Required
Involves welding, riveting, or bolt-on mounting — must be performed by experienced technicians.
Use proper lifting tools — this is a heavy and complex component.
Ensure Proper Alignment
Hood and fenders
Windshield and roof
Headlight housings
Check gaps between:
Misalignment affects appearance and aerodynamics.
Inspect Mounting Points
Confirm all brackets, hinge supports, and wiring pass-throughs are intact.
Repair any damaged areas before final tightening.
Welding Precautions
If welding is required, use spot welders or plug welds to avoid warping.
Avoid open flames near rubber seals or insulation.
Apply Anti-Rust Treatment
After installation but before painting, apply cavity wax or anti-corrosion spray inside box sections.
Paint After Installation
Must be professionally primed, sanded, and painted using automotive-grade urethane paint.
Match factory color code if available.
Seal All Joints
Use weatherproof sealant around windshield, hood, and light mounts to prevent water ingress.
Transportation & Packaging
Large sheet metal part — always shipped in wooden crate or reinforced cardboard with foam padding.
Handle carefully to avoid dents or bending.
Safety First
Never work under an unsupported cab.
Use jack stands or cradles when removing or installing large body panels.
| Attribute | Description |
|---|---|
| Part Name | Cab Front Panel Assembly / Front Body Panel / Front围板 |
| OEM Number | DZ14251153001 |
| Position | Front section of the truck cab — between the hood and A-pillar, forming the upper front face of the chassis |
| Material | High-strength cold-rolled steel sheet metal, precision stamped and welded |
| Design Type | Integrated structural panel with mounting points for hood hinges, lights, and grille |
| Surface Finish | Epoxy primer or zinc-coated undercoat — ready for painting (not painted) |
| Color (As Shipped) | Gray/black primer only — requires final paint after installation |
| Dimensions | Standard OEM size — full-width front panel; approx. 2.2m × 0.8m (varies by model) |
| Weight | Approx. 25–40 kg (depending on thickness and reinforcements) |
| Condition | Brand new (OEM fresh stock or high-quality aftermarket) |
| Function | |
| • Provides structural rigidity to the cab | |
| • Serves as foundation for front-end components | |
| • Contributes to crash energy absorption |
Name1
Name2
Verify Compatibility Before Purchase
Confirm vehicle model, year, and cab generation.
Some X3000 variants have slight differences in hole placement or curvature.
Professional Installation Required
Involves welding, riveting, or bolt-on mounting — must be performed by experienced technicians.
Use proper lifting tools — this is a heavy and complex component.
Ensure Proper Alignment
Hood and fenders
Windshield and roof
Headlight housings
Check gaps between:
Misalignment affects appearance and aerodynamics.
Inspect Mounting Points
Confirm all brackets, hinge supports, and wiring pass-throughs are intact.
Repair any damaged areas before final tightening.
Welding Precautions
If welding is required, use spot welders or plug welds to avoid warping.
Avoid open flames near rubber seals or insulation.
Apply Anti-Rust Treatment
After installation but before painting, apply cavity wax or anti-corrosion spray inside box sections.
Paint After Installation
Must be professionally primed, sanded, and painted using automotive-grade urethane paint.
Match factory color code if available.
Seal All Joints
Use weatherproof sealant around windshield, hood, and light mounts to prevent water ingress.
Transportation & Packaging
Large sheet metal part — always shipped in wooden crate or reinforced cardboard with foam padding.
Handle carefully to avoid dents or bending.
Safety First
Never work under an unsupported cab.
Use jack stands or cradles when removing or installing large body panels.
