T: +8615609213525
E: 15829336298@139.com
E: 15829336298@139.com
Room 1212-G107, Unit 2, Building 1, Block A, Shenglong Plaza, No. 80 Weiyang Road, Weiyang District, Xi'an City, Shaanxi Province
| Quantity: | |
|---|---|
811W25320-6002
Shacman
| Attribute | Description |
|---|---|
| Part Name | Right Front Combination Light Assembly / Right Fog & Turn Signal Unit |
| OEM Number | 811W25320-6002 |
| Position | Front lower right corner — installed in the bumper or grille area (passenger side) |
| Housing Material | High-impact ABS plastic with UV-resistant coating |
| Lens Type | Polycarbonate lens with anti-scratch and anti-fog treatment |
| Integrated Functions | |
| • Fog light (main function) | |
| • Turn signal indicator | |
| • Parking/side marker light | |
| Light Source | Halogen bulb or LED module (depending on configuration) |
| Voltage Rating | 24V DC (standard for commercial vehicles) |
| Dimensions (Approx.) | 45 cm × 22 cm × 17 cm (packing size); actual unit slightly smaller |
| Weight | Approx. 2.1 kg |
| Sealing Type | IP67-rated dustproof and waterproof seal |
| Condition | Brand new (OEM original or premium aftermarket) |
| Warranty | Typically 3 to 12 months against manufacturing defects |
Name1
Name2
Verify Compatibility Before Purchase
Confirm your truck model, year, and lighting configuration (LED vs halogen).
Use VIN/chassis number for most accurate matching.
Professional Installation Recommended
Involves removing bumper or grille components.
Avoid damaging surrounding paint or wiring.
Check Wiring Harness Connector
Ensure plug matches exactly — incorrect connection can damage circuitry.
Apply dielectric grease to pins to prevent corrosion.
Align Properly After Installation
Adjust aim so fog light beam is low and wide (not blinding oncoming traffic).
Test all integrated functions.
Test All Functions
Fog light
Turn signal
Position/parking light
Verify operation of:
Look for flickering or delayed response.
Seal Against Water Ingress
Ensure rubber gasket is intact and properly seated.
Water inside causes condensation and electrical failure.
Avoid Touching Bulb Glass (If Replacing Internally)
Oils from skin reduce lifespan — use gloves when handling halogen/LED bulbs.
Transportation & Packaging
Fragile lens — must be shipped in reinforced cardboard box or wooden crate with foam padding.
Never stack heavy items on top.
Do Not Operate With Open Housing
Moisture and debris will damage internal optics — only install sealed unit.
Storage Advice
Store upright in dry indoor environment.
Keep protective film until installation.
| Attribute | Description |
|---|---|
| Part Name | Right Front Combination Light Assembly / Right Fog & Turn Signal Unit |
| OEM Number | 811W25320-6002 |
| Position | Front lower right corner — installed in the bumper or grille area (passenger side) |
| Housing Material | High-impact ABS plastic with UV-resistant coating |
| Lens Type | Polycarbonate lens with anti-scratch and anti-fog treatment |
| Integrated Functions | |
| • Fog light (main function) | |
| • Turn signal indicator | |
| • Parking/side marker light | |
| Light Source | Halogen bulb or LED module (depending on configuration) |
| Voltage Rating | 24V DC (standard for commercial vehicles) |
| Dimensions (Approx.) | 45 cm × 22 cm × 17 cm (packing size); actual unit slightly smaller |
| Weight | Approx. 2.1 kg |
| Sealing Type | IP67-rated dustproof and waterproof seal |
| Condition | Brand new (OEM original or premium aftermarket) |
| Warranty | Typically 3 to 12 months against manufacturing defects |
Name1
Name2
Verify Compatibility Before Purchase
Confirm your truck model, year, and lighting configuration (LED vs halogen).
Use VIN/chassis number for most accurate matching.
Professional Installation Recommended
Involves removing bumper or grille components.
Avoid damaging surrounding paint or wiring.
Check Wiring Harness Connector
Ensure plug matches exactly — incorrect connection can damage circuitry.
Apply dielectric grease to pins to prevent corrosion.
Align Properly After Installation
Adjust aim so fog light beam is low and wide (not blinding oncoming traffic).
Test all integrated functions.
Test All Functions
Fog light
Turn signal
Position/parking light
Verify operation of:
Look for flickering or delayed response.
Seal Against Water Ingress
Ensure rubber gasket is intact and properly seated.
Water inside causes condensation and electrical failure.
Avoid Touching Bulb Glass (If Replacing Internally)
Oils from skin reduce lifespan — use gloves when handling halogen/LED bulbs.
Transportation & Packaging
Fragile lens — must be shipped in reinforced cardboard box or wooden crate with foam padding.
Never stack heavy items on top.
Do Not Operate With Open Housing
Moisture and debris will damage internal optics — only install sealed unit.
Storage Advice
Store upright in dry indoor environment.
Keep protective film until installation.
