T: +8615609213525
E: 15829336298@139.com
E: 15829336298@139.com
Room 1212-G107, Unit 2, Building 1, Block A, Shenglong Plaza, No. 80 Weiyang Road, Weiyang District, Xi'an City, Shaanxi Province
| Quantity: | |
|---|---|
1601130-ZB601
Dongfeng
| Attribute | Description |
|---|---|
| Part Number (OE) | 1601130-ZB601 |
| Product Name | Clutch Release Bearing Assembly (also known as Clutch Throwout Bearing) |
| Type | Thrust Angular Contact Ball Bearing with Self-Aligning Function |
| Application | Heavy-Duty Trucks / Manual Transmission Systems |
| Vehicle Brand | Dongfeng Commercial Vehicle (DFCV), Dongfeng Dana |
| Compatible Models | Dongfeng Kinland (KL), KX/GX Flagship, KC Hercules |
| Transmission Type | Mechanical Manual Transmission (AMT optional) |
| Clutch Size Compatibility | Φ430mm and Φ395mm Pull/Push-Type Clutches |
| Material | GCr15 high-carbon chromium-manganese bearing steel |
| Heat Treatment | Full hardening + surface carburizing for wear resistance |
| Lubrication | Pre-filled with high-temperature, extreme-pressure (EP) synthetic grease |
| Sealing Type | Dual-lip rubber seals (contact type) – dust and debris resistant |
| Function | Engages/disengages clutch by pressing on diaphragm spring fingers |
| Standard Compliance | Meets DFCV OE design; conforms to ISO 16264, GB/T 38822 |
| Parameter | Specification |
|---|---|
| Dynamic Load Capacity | ≥45 kN axial load |
| Maximum Operating Speed | Up to 6,000 rpm (intermittent) |
| Operating Temperature Range | -30°C to +220°C (peak short-term exposure up to 250°C) |
| Fatigue Life | ≥500,000 actuation cycles under full-load simulation (2026 durability benchmark) |
| Self-Alignment Capability | ±1° angular misalignment tolerance to accommodate driveline variations |
| Corrosion Protection | Zinc-coated housing (where applicable); sealed against moisture and contaminants |
| Pre-Lubricated Service Life | Maintenance-free for life; non-re-greaseable design |
| Attribute | Description |
|---|---|
| Part Number (OE) | 1601130-ZB601 |
| Product Name | Clutch Release Bearing Assembly (also known as Clutch Throwout Bearing) |
| Type | Thrust Angular Contact Ball Bearing with Self-Aligning Function |
| Application | Heavy-Duty Trucks / Manual Transmission Systems |
| Vehicle Brand | Dongfeng Commercial Vehicle (DFCV), Dongfeng Dana |
| Compatible Models | Dongfeng Kinland (KL), KX/GX Flagship, KC Hercules |
| Transmission Type | Mechanical Manual Transmission (AMT optional) |
| Clutch Size Compatibility | Φ430mm and Φ395mm Pull/Push-Type Clutches |
| Material | GCr15 high-carbon chromium-manganese bearing steel |
| Heat Treatment | Full hardening + surface carburizing for wear resistance |
| Lubrication | Pre-filled with high-temperature, extreme-pressure (EP) synthetic grease |
| Sealing Type | Dual-lip rubber seals (contact type) – dust and debris resistant |
| Function | Engages/disengages clutch by pressing on diaphragm spring fingers |
| Standard Compliance | Meets DFCV OE design; conforms to ISO 16264, GB/T 38822 |
| Parameter | Specification |
|---|---|
| Dynamic Load Capacity | ≥45 kN axial load |
| Maximum Operating Speed | Up to 6,000 rpm (intermittent) |
| Operating Temperature Range | -30°C to +220°C (peak short-term exposure up to 250°C) |
| Fatigue Life | ≥500,000 actuation cycles under full-load simulation (2026 durability benchmark) |
| Self-Alignment Capability | ±1° angular misalignment tolerance to accommodate driveline variations |
| Corrosion Protection | Zinc-coated housing (where applicable); sealed against moisture and contaminants |
| Pre-Lubricated Service Life | Maintenance-free for life; non-re-greaseable design |
