You are here: Home » Products » Sinotruk HOWO » Engine Systems » Sinotruk SinoTruck HOWO Dryer Assembly Air Dryer Assembly Factory WG9100368471

Sinotruk SinoTruck HOWO Dryer Assembly Air Dryer Assembly Factory WG9100368471

The OEM part number WG9000360571 refers to the Air Dryer Assembly, also known as an Air Drying Unit or Compressed Air Desiccant Dryer, used in the pneumatic braking system of SINOTRUK HOWO A7, T7H, SITRAK C7H, and other series heavy-duty trucks. This critical component removes moisture, oil mist, dust, and other contaminants from compressed air generated by the air compressor before it enters the air tanks and brake chambers.
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button
snapchat sharing button
telegram sharing button
sharethis sharing button
  • WG9000360571

  • Sinotruk HOWO

Attribute Description
Part Name Air Dryer Assembly / Air Drying Unit / Desiccant Air Dryer
OEM Number WG9000360571
Alternate Format WG9000360571/1 (updated variant)
Working Pressure 1.0 MPa (nominal operating pressure)
Max burst pressure: ~1.8–2.0 MPa
Operating Temperature Range -40°C to +100°C (suitable for extreme climates)
Type Integrated air dryer with control hole for automatic regeneration cycle
Design Type Modular unit with replaceable internal desiccant filter cartridge
Inlet/Outlet Connection Standard air brake fittings (G1/2" or 3/4" NPT threads)
Material
• Housing: High-strength corrosion-resistant steel or aluminum alloy

• Internal Core: Molecular sieve (desiccant), coalescing filter media

• Seals: Oil- and heat-resistant NBR/FKM rubber
Function
• Removes water vapor from compressed air

• Filters oil, dust, and particulates

• Prevents ice formation in winter

• Protects brake valves, ABS, and suspension systems
Drain Type Automatic electrically controlled purge or manual release (depending on model)
Condition Brand new (OEM fresh stock or premium aftermarket)
空气干燥器总成-2

Name1

空气干燥器总成-5

Name2

Important Usage & Installation Notes

  1. Professional Installation Required

    • Involves disconnection of high-pressure air lines and electrical connectors.

    • Must be performed by certified technicians familiar with pneumatic systems.

  2. Replace Desiccant Cartridge Regularly

    • The internal dryer core (e.g., WG9000360521) should be replaced annually or every 80,000–100,000 km.

    • Exhausted desiccant loses drying capacity — leads to water carryover.

  3. Check Drain Functionality

    • Test automatic purge function during air build-up cycle.

    • Listen for "blow-down" sound at end of compression.

  4. Ensure Correct Airflow Direction

    • Match inlet/outlet ports — reverse installation causes malfunction.

    • Follow flow arrow on housing.

  5. Use Proper Mounting Hardware

    • Install securely to prevent vibration damage.

    • Use rubber bushings if provided for noise isolation.

  6. Inspect for Leaks After Installation

    • Apply soapy water to connections — check for bubbles.

    • Even small leaks reduce system efficiency.

  7. Avoid Contamination During Service

    • Keep open ports covered until reconnected.

    • Never install in dusty or humid environments without protection.

  8. Verify Electrical Connections (if applicable)

    • Some models include heater or solenoid drain — ensure plug is tight and undamaged.

    • Check fuse and circuit before start-up.

  9. Do Not Bypass the Dryer

    • Operating without a functional dryer risks complete brake system failure over time.

  10. Storage Advice

    • Store upright in dry indoor environment.

    • Seal openings with caps to prevent debris entry.

      SINOTRUK HOWO Full Series Heavy Truck Air Dryer

OEM Part Number Part Full Name Applicable HOWO Models Specification & Features
WG9000360521 Single Tank Air Dryer Assembly with 4-circuit Protection Valve Classic HOWO 336/371/420, HOWO A7, Golden Prince, Steyr King Max working pressure 14bar, aluminum valve body, WABCO compatible, standard highway logistics model
WG9100368471 Light Duty Air Dryer Assembly Old 8×4 cargo truck, small HOWO dump truck, early HOWO chassis Compact single tank, built-in oil-water separator, no heating plug, light mining vehicles
WG9000360548 Euro 6 Integrated Air Processing Unit HOWO TH7, TX, MAX tractor, Sitrak C5H 6-circuit valve integrated, antifreeze heating device, large desiccant tank, match MC13 engine
WG9000360571 Original WABCO Air Dryer Assembly HOWO T7H, T5G, D7B, Sitrak C7H (MC07/MC11 MAN engine) Genuine WABCO structure, double-layer oil filter, low temperature resistant seal, long haul truck
WG9000360417 High Flow Heavy Load Air Dryer Assembly T7H 6×4 tractor, 540HP mining dump truck Oversized drying tank, dual oil passage, reinforced anti-vibration base, engineering overload vehicle
LG9700360015 Light Commercial Truck Air Dryer Unit HOWO Hanjiang, Shuaishuai light truck Mini lightweight structure, low air consumption, light load chassis
4324102470 WABCO Air Dryer Desiccant Cartridge (Replacement Core) All HOWO series universal replacement Interchangeable with WG9000360521, aftermarket spare core


Previous: 
Next: 
INQUIRE

RELATED PRODUCTS

ABOUT US

We uphold the principles of "honoring contracts, ensuring quality, cooperating with integrity, and pursuing mutual benefit." Looking forward to working with you to become your most trusted long-term partner.
陕西伟东鸿捷商贸有限公司
陕西省西安市未央区未央路80号盛龙广场A区1号楼2单元1212-G107室

QUICK LINKS

PRODUCT CATEGORY

CONTACT US

Leave a Message
Copyright © 2025 Shaanxi Weidong Hongjie Trading Co., Ltd. All Rights Reserved. SiteMapPrivacy Policy | Technical Support : Maizeng