T: +8615609213525
E: 15829336298@139.com
E: 15829336298@139.com
Room 1212-G107, Unit 2, Building 1, Block A, Shenglong Plaza, No. 80 Weiyang Road, Weiyang District, Xi'an City, Shaanxi Province
| Quantity: | |
|---|---|
DZ15221232541
Dongfeng
| Attribute | Description |
|---|---|
| Part Number (OE) | DZ15221232541 |
| Product Name | Left Rear Mudguard Bracket – Rear Section |
| Common Names | Fender Mounting Bracket (Rear), Mud Flap Support Arm |
| Application Position | Left side, rear axle area (between mid and end of fender assembly) |
| Vehicle Brand | SHACMAN (Shaanxi Heavy Duty Auto Co., Ltd.) |
| Compatible Models | Shacman X3000, X5000, X6000 Series (Tractor & Cargo Trucks) |
| Axle Configuration | 6×4, 8×4 tandem drive axle layouts |
| Material | Q235B carbon steel or higher-grade low-alloy structural steel |
| Manufacturing Process | Bent tube + welded joint construction |
| Surface Treatment | Black electrophoretic paint (E-coat); highly salt-spray resistant |
| Design Type | L-shaped or U-shaped cantilever bracket with pre-drilled mounting holes |
| Tube Diameter | Φ32mm – Φ38mm |
| Weight (Approx.) | 3.8 kg |
| Standard Compliance | Meets GB 7258 / GB 26511 requirements for wheel housing and under-run protection |
| Parameter | Specification |
|---|---|
| Yield Strength | ≥235 MPa (Q235B standard), higher for reinforced variants |
| Tensile Strength | ≥370–500 MPa |
| Weld Quality | Full-penetration welds; inspected via visual or dye penetrant testing |
| Corrosion Resistance | >1000 hours neutral salt spray test (ASTM B117) |
| Mounting Hole Pattern | Pre-drilled for compatibility with fender shell and frame brackets |
| Load Capacity | Supports full weight of plastic mudguard (~5–8 kg) plus wind/debris impact loads |
| Thermal Stability | Stable performance from -40°C to +90°C |
| Service Life | 6–10 years depending on operating environment |
