T: +8615609213525
E: 15829336298@139.com
E: 15829336298@139.com
Room 1212-G107, Unit 2, Building 1, Block A, Shenglong Plaza, No. 80 Weiyang Road, Weiyang District, Xi'an City, Shaanxi Province
| Quantity: | |
|---|---|
DZ9525952143
Shacman Sinotruk HOWO
| Category | Information |
|---|---|
| Part Type | Front Leaf Spring Front Bracket / Suspension Mounting Ear |
| OEM No. | DZ95259521510 |
| Alternate No. | DZ93189510202 (verify fitment) |
| Material | Cast Steel / Forged Steel |
| Weight | ~5.8 kg |
| Main Fitment | Shacman Delong F3000, M3000, F2000, X3000 series |
| Function | Connects front leaf spring to chassis frame; transfers suspension loads |
| Critical Notes | Safety-critical part, inspect regularly, professional install required, replace damaged units immediately |
Name1
Name2
As a critical suspension and safety-related component, improper handling or installation can compromise vehicle control and lead to dangerous failures.
Safety-Critical Component
This bracket directly supports the front suspension and carries dynamic loads.
Never operate the vehicle with a cracked, bent, or loose bracket.
Replace Immediately if Damaged
Cracks around weld zones or stress points
Plastic deformation (bending)
Corrosion thinning wall thickness
Inspect regularly for:
Replace at first sign of structural compromise.
Professional Installation Required
Must be installed by qualified technicians familiar with chassis repair.
Involves lifting the front axle or disassembling the spring pack.
Use Correct Fasteners & Torque
Install using high-tensile bolts (Grade 10.9 or higher).
Tighten all mounting bolts to manufacturer-specified torque values.
Recheck after initial 500 km of operation.
Inspect Associated Components
Leaf spring condition (cracks, broken leaves)
Shackle pins and bushings — replace if worn or seized
Rubber/metal bushings — ensure flexibility and damping
Frame integrity — no rust-through or warping
Before final assembly, check:
Avoid Unauthorized Welding or Modifications
Do not weld onto the bracket or frame unless performed by certified personnel.
Improper welding alters metallurgy and weakens the structure.
Ensure Proper Alignment
Premature wear
Axle misalignment
Tire feathering or cupping
Misaligned brackets cause uneven spring loading, leading to:
Clean Frame Before Installation
Remove paint, rust, oil, and debris from contact surfaces.
Ensures solid metal-to-metal bonding and prevents slippage.
Do Not Reuse Severely Worn Pins/Bushings
Worn shackle pins increase play → noise, vibration, and accelerated bracket wear.
Always replace pins and bushings as a set when replacing the bracket.
Post-Replacement Inspection
Conduct visual inspection after installation.
Test drive at low speed to monitor for clunking noises or instability.
| Category | Information |
|---|---|
| Part Type | Front Leaf Spring Front Bracket / Suspension Mounting Ear |
| OEM No. | DZ95259521510 |
| Alternate No. | DZ93189510202 (verify fitment) |
| Material | Cast Steel / Forged Steel |
| Weight | ~5.8 kg |
| Main Fitment | Shacman Delong F3000, M3000, F2000, X3000 series |
| Function | Connects front leaf spring to chassis frame; transfers suspension loads |
| Critical Notes | Safety-critical part, inspect regularly, professional install required, replace damaged units immediately |
Name1
Name2
As a critical suspension and safety-related component, improper handling or installation can compromise vehicle control and lead to dangerous failures.
Safety-Critical Component
This bracket directly supports the front suspension and carries dynamic loads.
Never operate the vehicle with a cracked, bent, or loose bracket.
Replace Immediately if Damaged
Cracks around weld zones or stress points
Plastic deformation (bending)
Corrosion thinning wall thickness
Inspect regularly for:
Replace at first sign of structural compromise.
Professional Installation Required
Must be installed by qualified technicians familiar with chassis repair.
Involves lifting the front axle or disassembling the spring pack.
Use Correct Fasteners & Torque
Install using high-tensile bolts (Grade 10.9 or higher).
Tighten all mounting bolts to manufacturer-specified torque values.
Recheck after initial 500 km of operation.
Inspect Associated Components
Leaf spring condition (cracks, broken leaves)
Shackle pins and bushings — replace if worn or seized
Rubber/metal bushings — ensure flexibility and damping
Frame integrity — no rust-through or warping
Before final assembly, check:
Avoid Unauthorized Welding or Modifications
Do not weld onto the bracket or frame unless performed by certified personnel.
Improper welding alters metallurgy and weakens the structure.
Ensure Proper Alignment
Premature wear
Axle misalignment
Tire feathering or cupping
Misaligned brackets cause uneven spring loading, leading to:
Clean Frame Before Installation
Remove paint, rust, oil, and debris from contact surfaces.
Ensures solid metal-to-metal bonding and prevents slippage.
Do Not Reuse Severely Worn Pins/Bushings
Worn shackle pins increase play → noise, vibration, and accelerated bracket wear.
Always replace pins and bushings as a set when replacing the bracket.
Post-Replacement Inspection
Conduct visual inspection after installation.
Test drive at low speed to monitor for clunking noises or instability.
